Voltatex 8816

Voltatex® 8816 represents a class thermoplastic bonding wire enamel. Voltatex 8816  bonding wire enamel can be applied to polyurethane, polyesterimide and polyesterimide/polyamideimide base coats. Magnet wires coated with Voltatex 8816 as bond coat may be bonded by resistance heating, solvents or hot air.
The minimum bonding temperature is 160 °C, but optimum bond strength requires a temperature of 180 °C. Combined with other Voltatex wire enamel products Voltatex 8816 as bond coat exceed the requirements and technical conditions of IEC 60317-35/36 and 37 and acc. ANSI/NEMA MW 131-C, MW 135-C and MW 136-C. Listed test results based on Axalta Coating Systems standards, following IEC standards 60851.

Product Criteria

- Motors / Generators
- Automotive

- Bondcoat

Product Features
Chemical base EPOXY
For diameter range
0.30 – 3.00 mm
Solid content (1g, 1h, 180 °C)
15.0 − 17.0 %
Viscosity DIN 53015
300 − 600 mPas (23 °C / 73.4 °F)
Special characteristics
Bonding topcoat without cresylic acid solvent, epoxy-based; for round and rectangular wires

To request the technical datasheet for this product we would ask you to provide your data via the following form.

Please enter your first name.
Please fill in this field
Please enter a valid email address
Please verify that you're not a robot
Your captcha response was incorrect. Please try again.