Voltatex 8718

Voltatex® 8718 represents a class of thermoplastic bonding wire enamels without cresolic acid solvent. Voltatex 8718 bonding wire enamel can be applied to polyurethane base coats. Magnet wires coated with Voltatex 8718 as bond coat may be bonded by resistance heating, solvents or hot air.  The minimum bonding temperature is 100 °C, but optimum bond strength requires a temperature above 140 °C.   Combined with other Voltatex wire enamel products, Voltatex 8718 as bond coat exceed the requirements and technical conditions of IEC 60317-35/36 and acc. ANSI/NEMA MW 131-C, MW 135-C and MW 136-C. Listed test results based on Axalta Coating Systems standards, following IEC standards 60851.

Product Criteria

- Motors / Generators
- Automotive

- Bondcoat

Product Features
Chemical base BUTYRAL
For diameter range
0.20 – 1.00
Solid content (1g, 1h, 180 °C)
16.5 − 18.5 %
Viscosity DIN 53015
500 − 700 mPas (23 °C / 73.4 °F)
Special characteristics
Bonding topcoat without cresylic acid solvent, bond topcoat over polyurethane

To request the technical datasheet for this product we would ask you to provide your data via the following form.

Please enter your first name.
Please fill in this field
Please enter a valid email address
Please verify that you're not a robot
Your captcha response was incorrect. Please try again.