Voltatex 8327

Voltatex® 8327 is developed for the application on heavy round and rectangular conductors as single and as topcoat for multi layer. Magnet wires insulated with Voltatex 8327 combine high cut-through as well as heat shock and abrasion properties. Additional typical properties are the very good edge covering for rectangular wires and transformer oil resistance acc. IEC 60851-4.   Combined with other Voltatex wire enamel products Voltatex 8327 is usable for wires acc. ANSI/NEMA MW 35-A-C,MW 36-A-C, MW 37-C, MW 73-A-C, MW 81-C, MW 102-A-C. Magnet wires coated with Voltatex 8327 as topcoat exceed the requirements and technical conditions of IEC 60317-13/22/24/25/29. Listed test results based on Axalta Coating Systems standards, following IEC standards 60851.

Product Criteria

- Motors / Generators
- Automotive
- Transformers

- Topcoat
- CRS (Corona)

Additional features
- UL-approved

Product Features
Thermal class 220 °C
For diameter range
0.50 − 5.00 mm
Solid content (1g, 1h, 180 °C)
26.0 − 28.0 %
Viscosity DIN 53015
2,100 − 2,900 mPas (25 °C / 77.0 °F)
Special characteristics
Both overcoat and single coat for both rectangular and e.g. round conductors 

To request the technical datasheet for this product we would ask you to provide your data via the following form.

Please enter your first name.
Please fill in this field
Please enter a valid email address
Please verify that you're not a robot
Your captcha response was incorrect. Please try again.