Voltatex 8137


Magnet wires insulated with Voltatex® 8137 as topcoat combine high cut-through as well as heat shock and abrasion properties. Additional typical properties are their good chemical resistance, and transformer oil resistance acc. IEC 60851-4. Voltatex 8137 can be used as single coat and as topcoat for multi layers.  Combined with other Voltatex wire enamel products Voltatex 8137 is usable for wires acc. ANSI/NEMA MW 35-A-C, MW 37-C, MW 73-A-C, MW 81-C, MW 102-A-C. Magnet wires coated with Voltatex 8137 as topcoat exceed the requirements and technical conditions of IEC 60317-13/22/25. Listed test results based on Axalta Coating Systems standards, following IEC standards 60851.

Product Criteria

Market
- Motors / Generators
- Automotive
- Transformers

Application
- Topcoat

Additional features
- UL-approved

Product Features
Chemical base POLYAMIDEIMIDE
Thermal class 220 °C
For diameter range
0.50 − 5.00 mm
Solid content (1g, 1h, 180 °C)
35.0 − 38.0 %
Viscosity DIN 53015
1,500 − 2,500 mPas (23 °C / 73.4 °F)
Special characteristics
Both overcoat and single coat, mainly used as a topcoat in combination with a polyester or polyesterimide basecoat

To request the technical datasheet for this product we would ask you to provide your data via the following form.

Please enter your first name.
Please fill in this field
Please enter a valid email address
Required field
Please verify that you're not a robot
Your captcha response was incorrect. Please try again.