Fairground Equipment
Project name |
Location |
Country |
Market area |
|
Fairground Equipment |
North Yorkshire |
UK |
General Industrial |
Requirement
Severe breakdown of existing coatings was evident on fairground rides. The client wanted long term protection without the need to blast clean the steel. Lead-free products were also a requirement.
Preparation
Surfaces were degreased and then hand prepared to St2 standard of EN ISO 8501-1:2007, washed with fresh water and allowed to dry.
Coatings
A coat of Corroless S1 was followed by a coat of Corroless S2 as primers, with a topcoat of Corroless RF16 to complete the system. Edges, welds, nuts and bolts were stripe coated before applying each full coat.
Product (per coat) |
DFT (per coat) |
Colour |
---|---|---|
Corroless S1 |
35 microns |
Red |
Corroless S2 |
35 microns |
Buff |
Corroless RF16 |
50 microns |
Various |